Floor-in-One 225 225STFG

High Performance Inkjet Media for Latex, Solvent & UV Printers

Features

Suitable for almost all indoor floors and walls like carpets, vinyl, ceramic, tiles, wood laminate flooring, smooth-polished concrete…
Also suitable short term outdoor on smooth floors
No lamination required
Easy to apply, reposition and remove
R12 (slip resistance) and B1 (fire rating) certified

Sizes

Available in widths of: 1220mm

Thickness (500µ/19.7mil) Weight (385gsm)

Available in UK only

Applications

Floor graphics
Semi and permanent wall graphics

Installation Instructions

General

Recommended Conditions:

Printroom	15°C – 30°C	30% – 65% RH
Usage	-40°C – 80°C	10% – 90% RH
Storage	10°C – 20°C	20% – 50% RH

Shelf Life: 12 months after delivery (under recommended storage conditions)

Durability

The durability of Floor-in-One is dependent on the inks used, surface applied and the amount and type of foot traffic. We recommend –A maximum use of 2 months for low-traffic, indoor floor applications with UV inks, one month for latex inks and three weeks for solvent inks, 3-24 months for walls and non-pedestrian applications (UV, latex or solvent inks)

A maximum use of 1 week for outdoor applications on smooth surfaces e.g. polished concrete but is not designed for road traffic or stone-filled surfaces such as asphalt or rough, screeded concrete. Furthermore, it also depends on the mechanical use of the surface where it is applied.

Floor-in-One must be applied to clean, dry, smooth surfaces above freezing (e.g will not adhere to a frosted or wet/damp surfaces)